There are still many functions of the gate. First of all, it is very important for us to understand the advantages and disadvantages of the following gate.
Swing gate is generally called slap gate in the rail transit industry. The form of its arresting body (gate swing) is a plane with a wide area, perpendicular to the ground, and arresting and release are realized by rotating and swinging. The materials of the arresting body are usually stainless steel, plexiglass and toughened glass, and some also use metal plates wrapped with special flexible materials (to reduce the injury of hitting pedestrians). In terms of movement control mode, it is divided into mechanical type and full-automatic type. It can be divided into vertical type, bridge type and cylindrical type in form. The vertical type and cylindrical type are small in volume and easy to install, but the channel length is short, and the function of pedestrian detection module is limited; The bridge swing gate channel is longer, the pedestrian detection module has stronger function and higher security
Advantages 1. The wide range of the passage is the largest among all gates, generally between 550mm-1000mm. Some customized products can be 1500mm, which is more suitable for pedestrians or bicycles carrying luggage and parcels, and can also be used as a special passage for people with mobility difficulties. 2. Compared with the three roller gate, the bridge swing gate adds a pedestrian passage detection module, which can effectively detect the passage target and has strong anti tailing ability. 3. The plasticity of appearance form is strong among all gates. The material types of arresting body are rich, and the form of box body is also diversified. It is easy to design a very beautiful shape. Therefore, it is often used in public places such as office buildings, intelligent buildings, clubs and so on. 4. There is no mechanical collision during the operation of the brake pendulum, and the noise is relatively small.
Disadvantages 1. The cost is high, especially for some special customized models, such as increasing the channel width and using the gate pendulum of special materials, the technical difficulty will increase a lot accordingly. 2. The waterproof and dustproof capacity of some models is insufficient, which is only suitable for indoor use, and the environmental adaptability is not as strong as that of the three roller brake. 3. Limited by the shape of the arresting body, the impact resistance of the swing gate is lower than that of the three roller gate, and the illegal rapid passage of pedestrians can easily damage the swing gate and movement. 4. If the manufacturer's design is not good
