The cleaning and maintenance of the pedestrian passage gate will directly affect its service life. Therefore, whether it is the swing gate, wing gate or three roller gate installed indoors or outdoors, it needs to be cleaned and maintained regularly. Shenzhen zhishutong reminds that the daily cleaning of the pedestrian passage gate is divided into surface cleaning and internal cleaning, and the cleaning cycle should be once a week.
The daily cleaning and maintenance of the pedestrian passage gate mainly includes cleaning and maintenance. The gate cleaning includes the surface of stainless steel chassis, plexiglass, tempered glass and the inside of the gate. The following is a detailed introduction:
1、 Case stainless steel surface
1. Cleaning tool preparation
① Clean soft rag
② Rust free water and weakly alkaline detergent mixed with water (proportion: 7:1)
2. Cleaning method
① Disconnect the power supply, clean the dust on the stainless steel surface outside the chassis with a rag, spray the cleaning liquid such as stainless steel cleaning Brightener on the clean rag and wipe along the stainless steel wire drawing pattern of the chassis to achieve a clean and bright effect.
② Clean the bottom of the chassis and the surrounding ground with a rag to ensure that the bottom of the chassis is dry without ponding.
3. Precautions
Do not use water, strong alkaline solvents and acidic solvents for cleaning.
2、 Plexiglass
1. Cleaning tools
① Clean soft rag
② Cleaning solvent (special plexiglass cleaner, 1% concentration soapy water, glass cleaning solution "glass water", 30% medical alcohol, diesel and other weak alkaline and weak acidic solvents)
2. Cleaning method
① Cleaning ordinary floating ash: gently wipe the surface of plexiglass with a rag wet with cleaning solvent, or spray water mist on plexiglass with a watering can, gently wipe with a rag, and then dry with a dry rag.
② Clean the adhesive dust: apply a small amount of diesel oil on the cotton cloth and wipe it gently. If there is no diesel oil, the method of treating ordinary floating ash can be used, and 30% medical alcohol can be mixed in water.
③ Treatment of capillary scratch on plexiglass surface: apply some toothpaste on cotton cloth and gently wipe the scratch for about 5 minutes.
3. Precautions
Do not use acetone solvents, industrial alcohol, strong alkaline and acidic corrosive liquids for cleaning
3、 Tempered glass
1. Cleaning tools
① Clean soft rag
② Cleaning solvent (glass cleaning liquid "glass water", 1% concentration soapy water, 30% medical alcohol, vinegar, concentrated brine and other weak alkaline and weak acid solvents)
2. Cleaning method
① Cleaning ordinary floating ash: gently wipe the surface of plexiglass with a rag wet with cleaning solvent, or spray water mist on plexiglass with a watering can, gently wipe with a rag, and then dry with a dry rag.
② Clean stubborn stains: wipe with a rag stained with 30% medical alcohol or warm vinegar and glass cleaner.
③ Cleaning surface frosting: wipe it with a rag stained with concentrated saline or 30% medical alcohol.
3. Precautions
Do not use strong alkaline, acidic and other corrosive liquids for cleaning
4、 Inside the pedestrian passage gate
1. Cleaning tools
① Clean soft rag
② Dust blowing gun
③ Stainless steel cleaning brightener
2. Cleaning method
① Disconnect the power supply, open the maintenance door, remove the dust and fine debris inside the box with a dust blower, and focus on cleaning the movement, circuit board, switching power supply, gap and the bottom of the box to ensure that the surface is clean and dry.
② Wipe the floating dust inside the box and on the surface of parts with a rag.
③ In addition, take a rag, dip an appropriate amount of stainless steel cleaning and polishing agent, and gently wipe it along the stainless steel surface grain of the maintenance door to ensure brightness.
3. Precautions
Do not use vacuum cleaner or hot air cleaner
The daily maintenance of pedestrian access gate shall pay attention to the following contents:
1. It is forbidden for non professionals to open the chassis for debugging, maintenance and product service;
2. It is forbidden to use hard objects to clean the gate surface, otherwise it is easy to scratch and affect the appearance.
3. It is forbidden to use clean water for cleaning, otherwise it is easy to cause short circuit of electrical accessories and affect the normal use of the gate.
4. The connection of each interface of the movement must be checked regularly to prevent the connecting firmware from loosening.
5. The movement components must be lubricated regularly with lubricant.
6. The socket and line connection must be checked regularly to ensure the stability of line connection.
7. The grounding connection of the electrical system must be checked regularly to prevent electric leakage.
8. After inspection and maintenance, please supply power to the gate system and close the maintenance door.
